Toshiba ICC Multiprotocol Ethernet Interface ASD-G9ETH Manual do Utilizador descarregar pdf (Página 16)

ICC

Figure 2: Removing the Drive's Front Cover

4. Install the interface card into the drive by inserting the tabs on the lower

legs of the interface housing into the corresponding slots on the drive’s

enclosure. Rotate the interface housing up and press it onto the drive

enclosure’s mounting tabs, depressing firmly until the housing snaps into

place (Figure 3). Double-check that the plastic bosses located on the left

and right side of the drive enclosure are properly inserted into the

corresponding recesses on the back of the interface housing, and that the

interface housing is overall secure and flush with the drive enclosure.

Figure 3: Installing the Interface Card

5. Reinstall the drive’s front cover by inserting the tabs on the bottom part of

the front cover into the corresponding slots on the interface housing.

Rotate the front cover up and press it onto the interface housing’s

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 99 100

Sem comentários

Toshiba ICC Multiprotocol Ethernet Interface ASD-G9ETH Manual do Utilizador Página 16